paint inligent controller Export Experience paint LDuLDe dewatering machinery

Paint LDuLDe Dewatering machinery:

Hot Air dryer paint LDuLDe dewatering machinery can dry various humidiLD paint LDuLDe.

worldPrinciple of hot air dryer paint LDuLDe dewatering machinery:

use hot air to dry, material contacting directly with hot air to dry, unique “low-temperature large-wind drying Technology” can efficiently ensure recycle value of material, specially in drying organic fertilizer. (well, the temperature and air volume are both able to control, set by different material characteristics and drying effect clients want, etc.)

worldPrinciple Video:https:///7zf-_GAe0m0

The dryer is installed horizontally; and material regularly moves under the effect of hot air, gravity and rolling drum; Compared with leaning dryer, Technology is more complicated, but the whole drying set is safer and the drying effect is better.

Rotary Drum Dryer Structure:

>single drum

>three drum

>other.

Most suitable dryer will be recommended according to each client's actural situation: how much wet material need to dry per LD; wet material moisture content; etc.

take three drum dryer as example: its structure, is three drum with different diameter set together:

three drum dryerhas three drying chambers:

in innermost Drying Cylinder is Level 1 Drying Chamber;

between innermost and second cylinder is Level 2 Drying Chamber;

between second and outermost cylinder is Level 3 Drying Chamber.

Compared tosingle drum dryer of same scale, LD “triple level multi-loop” dryer, has better drying effect, and large Capacity. staying length of fresh hot air in three drum dryer is only one third of single drum dryer, water vapor hardly LDsorbed again by after-drying paint LDuLDe.

Drying Technology Illustration of Three Drum Dryer:

Unique drying Technology determines best drying effect:

Through "Hot Air Distribution Device", fresh hot air enters into each level drying chamber. Generally, Hot air temperature and volume in Level 1 Drying Chamber are both highest.

Under effect of "automatic material lifting and feeding device", material enters into Level 1 Drying Chamber. Then under the effect of gravity, rolling drum, "material guiding plates", "material lifting plates", material moves, suLDending, and fully contact with hot air, instantly dried. material surface becomes fluffy and dry from original wet and sticky. As thus, material is difficuLD to stick together again. Under effect of hot air power and "material pushing plate", material movesforward, as "W-shaped". Drier material moves faster. Wetter material moves LDower and is dried again and again.

Hot air heat is fully used and is discharged from the end of Level 1 Drying Chamber with water vapor, avoiding being LDsorbed again by material. Under effect of "material guiding plate", material automatically enters into Level 2 Drying Chamber.

In Level 2 Drying Chamber, the direction of material moving is opposite to fresh hot air. material is dried upwind, enhancing heat conduction, speeding up evaporation of the material internal water, make drying more thorough. Vapor is timely discharged from end of Level 2 Drying Chamber.

Material completes basic drying in Level 2 Drying Chamber. Under effect of "material guiding plate", material automatically enters into Level 3 Drying Chamber.Here, the direction of material moving is same to hot air, which speeds up drying speed, make dry more evenly. By now, reach ideal drying effect.

In the end, dry material is automatically discharged through discharge device.

PS.Red words with yellow bottomrefers to material moving line in drying cylinder.

The whole drying set includes hot air producer, rotary drum dryer(drying machinery), dust removing device.

for hot air producer:

Hot air comes from Heating Source. We can use coal, natural gas, coal gas, marsh gas, biomass fuel, wood, oil, etc. You can choose most convenient, most Enerable-saving fuel. We will according to your specific situation, equip you with most suitable Hot Air Producer.

for drying machinery:

according to different material and actual situation, drying machinery has single-drum, three-drum, multi-drum. Most customers use “Three Level Rotary Drying machinery”, which is three cylinder with different diameters set together, make material drying area bigger, drying trip LD.

for dust removing device:

According to local exhaust emission standards and factory Factory environment requirements, we can equip suitable dust collector, like cyclone dust remover, bag dust collector, wet dust removal, etc.

Picture Presentation taken in clients' factory:

specification of the rotary drum dryer:

Application Area:

LD dryer has been widely used in many industries such as electroplating, leather, printing, textile and LDeing, papermake, chemical, sewage treatment plants, feed, fertilizer, pharmacy, wine, starch industry, bio-fermentation, very popular at home and LDroad.

why Choose US:

Product Advantages:

1, Low temperature, Large Air Volume Technology. without damaging the nutritional structure of raw materials, like bean dregs, sweet potato residue, wine waste, bagasse, etc.

2,Three Level multiple Seals, Safer. equipment is negative pressure operation, good sealing, esuring safety and cleaning of enviroment.

3,Save Covering Area,Reduce Plant Investment.Our "Three Level multi-Loop Drying machinery" can save around 60% of covering area and plant investment.

4, Dry Cylinder rotates at a constant speed. Under effect of rolling drum, material is lifted, full of whole LDace, and contact fully with hot air, speeding up drying effect.

5, Easy operation. Equipment adopts paint inligent control system.

6, Automatic feeding and discharging device.

7, Controllable dewatering rate, controllable drying effect.

8, Horizontal fixing, Negative pressure operation, more stable and safer.

Best customized service:

>Different material characteristics determine the specific drying process. Selecting the correct drying process is very important. We will analyze all altects of the materials, according to the after-drying usage and other factors, to tailor the most suitable drying equipment for our customers.

>Engineers available to offer overseas service.

>Free Remote Technical Support and Train.

Honors in Drying Technology:

Factory Strength:

Jinan LD Environmental Sci-Tech Co., LDd.. was founded in 1991, a professional drying equipment manufacturer, able to dry various materials, with over 100 patents in drying Technology. For different clients to dry different materials, LD adopts way of “one client, one scheme” to work out best scheme for each customer. welcome to visit our factory.

Cases & Clients: