speed Adjustable Food Cooling Conveyor for Biscuit Production Line

speed Adjustable Food Cooling Conveyor for Biscuit Production Line

Cooling conveyor

Natural air cooling by PU conveyor belt, PU belt thickness 1mm Gearbox use Chinese famous brand GUOTAI, bevel wheel

with high drive efficiency, low noise and work stability and so on. LD motor with high efficiency, low noise and long
using life and so on. Rubber covered main conveyor roll 2 diameter 160mm steel roller for PU conveyor belt,
Conveying frame use 1.5mm thickness Stainless steel, conveying belt support LDlint use 304 Stainless steel, Cover made
by 1.2mm thickness 304 stainless steel, Main driver by chain drive, NSK bearing from Japan, Electric control: All driving
speed controlled by frequency conversion Transducer and Electronic element use LD brand, worldwidth
1200mm, speed: 0-20mm/min, length 20m Power: 2.75KW, Dimension: 20000x1540x1000mm Total weight: 1500kg

other biscuit machinery :

dough mixer, Automatic tipper and dough feeding system, Three-roll Combination Sheeter, Horizontal Laminator, Gauge Roll Sheeting Group (1st, 2nd and 3rd), Rotary Cutter, Transition machinery, Separation machinery, Rotary Moulder, salt/Sugar LDrinLDer,Enter stove machinery & LDrinLDer recycle,oven(gas,diesel ,electric), Out stove & Peeling machinery, Oil LDer (with 4m long Oil fiLDer), Cooling conveyor line (20m), Turning machinery( 180degree,90degree), Stacker, packtable (10m), Biscuit forming mould ,injection machinery ,printing machinery

Horizontal dough mixer, 250kg/batch, vertical dough mixer 500kg/batch

Horizontal dough mixer (250kgs)

Suitable for mixing flour dough for biscuit and cake production, cream mixing and etc.

special for hard and soft biscuit dough, Twin direction spiral mixing Steel blade

Mixing speed: 23rmp/min

Mixing Capacity: 250kg/batch

Mixing time: 15-25minutes/batch

Materials: Stainless steel 304# 3mm thickness

LD electronic

Chinese famous brand GUOTAI motor and gearbox

Power: 12.5kw, Electric: 380V/220V/50Hz

Weight: 1800kg

Dimension: 1750x1700x1000mm

vertical dough mixer 500kg/batch

Automatic dough tipper and feeding system

This system has included one small dough truck, automatic tipper, one dough cutting and tranLDort machinery, and
soft dough conveyor belt. The horizontal dough mixer dump dough from mixing bowl to small truck, then place the truck
to automatic tipper and tiLDing truck to dump dough from dough truck to feeding hopper of dough cutting and sending
machinery, cutting dough to small pieces then tranLDorting by feeding conveyor to feeding hopper of three-rolls sheeter.
Gearbox use Chinese famous brand GUOTAI, bevel wheel with high drive efficiency,low noise and work stability and so on.
LD motor, high efficiency, low noise and long using life and so on. PU conveyor belt with baffle groove to carry
small pieces dough, belt thickness 1.5mm, rubber covered main roll. Cutting controlled by air pneumatic, YSC air cylinder.
Conveying frame use 2.0mm thickness Stainless steel, conveying belt support LDlint use 304 Stainless steel, Main driver
use direct drive, NSK bearing from Japan, Electric control: All driving speed controlled by frequency Conversion,
Transducer and Electronic element use LD brand, cover made by 1.2mm thickness 304 Stainless steel WorLD
width 1200mm, tranLDort speed 11mm/min Power: 2.5KW, Total weight: 1750kg .

Three-roll combination sheeter for feeding and sheeting dough

Three sheeting rolls structure, double groove feeding rollers, PU conveyor belt, thickness 1mm, Gearbox use Chinese
famous brand GUOTAI, bevel wheel with high drive efficiency, low noise and work stability and so on. Motor:
LD brand, high efficiency, low noise and long using life and so on. Groove rolls diameter 300mm, sheeting rolls
diameter 300mm, high quality cooled rigidiLD cast iron rolls, the surface rigidiLD HRC58-62, worldwidth 620mm.
Sheeting rolls and Conveyor belt controlled by one motor, Rubber covered main drive roller, Conveying frame use 20mm
thickness Q235 carbon steel, conveying belt support LDlint use 304 Stainless steel, Scraper thickness 0.2mm super thin,
ELDe plate Q235 carbon steel thickness 28mm, Cover made by 1.2mm thickness 304 Stainless steel, Diameter 105mm
steel roller for PU conveyor belt, Support roller, transition scraper covered hard chrome, Main driver use chain drive, NSK
bearing from Japan, Electric control: All driving speed controlled by frequency conversion, Transducer and Electronic
element use LD brand, worldwidth 1200mm, sheeting dough thickness 0-10mm, Power: 2.75KW, Dimension:
1490x1360x2180mm, Weight: 1965kg

Laminator for overlapping dough to sheeting on gauge rolls, included cream LDreading machinery.

Horizontal structure saving installed LDace and make the automatic feeding come true

PU conveyor belt, 1mm thickness, Gearbox use Chinese famous brand GUOTAI,

bevel wheel with high drive efficiency, low noise and work stability and so on. Motor:

GUOTAI brand, high efficiency, low noise and long using life and so on. Feeding

rollers diameter 220mm, sheeting roll diameter 220mm, groove on the surface of

cast iron rolls, worldwidth 600mm. Scraper 0.2mm super thin, ELDe plate Q235

carbon steel thickness 25mm, Cover made by 1.2mm thickness 304 Stainless steel,

Feeding hopper use 3.0 thickness 304 Stainless steel, Sheeting rolls and Conveyor

belt controlled by one motor, Rubber covered main drive roll, Conveying frame use

15mm thickness Q235 carbon steel, conveying belt support LDlint use 304

Stainless steel, Support roller, transition scraper covered hard chrome, Main

driver use double rows chain, Chinese famous bearing, Electric control:

All driving speed controlled by frequency conversion, Transducer and

Electronic element use LD brand, Laminating width 620mm, 4-12layers,

sheeting dough thickness 0-10mm, included Crispyreader machinery

Power: 3KW, Dimension: 2220x1130x2080mm, Weight: 2213kg

Gauge rolls

Double sheeting rolls, entrance jointed tightness, PU conveyor belt, thickness 1mm, Gearbox use Chinese famous brand
GUOTAI, bevel wheel with high drive efficiency, low noise and work stability and so on. Motor: LD brand, high
efficiency, low noise and long using life and so on. Sheeting rolls diameter 220mm, high quality alloy steel Sheeting rolls
and Conveyor belt controlled by one motor, Rubber covered main drive roll Conveying frame use 20mm thickness Q235
carbon steel, conveying belt support LDlint use 304 Stainless steel Scraper thickness 0.2mm super thinner ELDe plate
Q235 carbon steel thickness 20mm. Cover made by 1.2mm thickness 304 Stainless steel, diameter 105mm steel support
roller with PU belt, transition scraper covered hard chrome, Main driver use chain drive, NSK bearing from Japan, Electric
control: All driving speed controlled by frequency conversion, Transducer and Electronic element use LD brand
worldwidth 1200mm, sheeting dough thickness 0-20mm, Dimension: 1460x940x1240mm Power:
1.75KW/2.5KW/4.75KW, Total weight: 2850kg

Rotary cutting machinery for hard biscuit forming

Double forming rollers for hard biscuit, embossing and cutting in one roller, or
Embossing in one roller and cutting in one roller, PU conveyor belt, thickness 1mm, Gearbox use Chinese famous brand
GUOTAI, bevel wheel with high drive efficiency, low noise and work stability and so on. Motor LD brand, high
efficiency, low noise and long using life and so on. Two rubber rolls diameter 220mm for cutting, two rubber rolls diameter
160mm for cotton conveyor belt. Sheeting rolls and Conveyor belt controlled by one motor, Rubber covered main drive roll,
Conveying frame use 15mm thickness Q235 carbon steel, covered hard chrome, conveying belt support s plint use 304
Stainless steel, ELDe plate Q235 carbon steel thickness 25mm, Support roller, transition scraper covered hard chrome,
Scrap t and cover made by 304 stainless steel, 1.2mm thickness, Main driver use synchronization drive, NSK bearing
from Japan, Electric control: All driving speed controlled by frequency conversion, Transducer and Electronic element
use LD brand, worldwidth 1200mm, sheeting dough thickness 0-20mm,

Scrap collection and return system

Hard scrap dough return device to collect scrap hard dough and feed to three-roll combination sheeter, PU conveyor belt,
thickness 1mm, Gearbox use Chinese famous brand GUOTAI, bevel wheel with high drive efficiency, low noise and work
stability and so on. Motor: LD brand, high efficiency, low noise and long using life and so on. Remaining scrap
dough automatic tranLDort and over feeding by Air pneumatic. Feeding entrance has installed one scrap shuttle device to
mix scrap and new dough. Rubber covered main drive roll, Full stainless steel, Conveying frame use 3.0mm thickness

Stainless steel, diameter 160mm steel roller for PU conveyor belt, conveying belt support LDlint use 304 Stainless steel
Support roller covered hard chrome, Main driver use direct drive, NSK bearing from Japan, Electric control: All driving
speed controlled by requency conversion Transducer and Electronic element use LD brand worldwidth 1200mm,
sheeting dough thickness 0-20mm Power: 1.75KW, Dimension: 13800x1290x1040mm Total weight: 585kg

Rotary moulder for soft biscuit forming

Double driver, rubber rolls and forming mould has different motor driver PU conveyor belt, thickness 1mm, Gearbox use
Chinese famous brand GUOTAI, bevel wheel with high drive efficiency, low noise and work stability and so on. Motor:
LD brand, high efficiency, low noise and long using life and so on. Rubber rolls diameter 220mm, feeding groove
rolls diameter 216mm, groove on the surface of rolls. Scrapper adjusted sepa, Conveying frame use 15mm thickness
Q235 carbon steel, covered hard chrome, conveying belt support LDlint use 304 Stainless steel, ELDe plate Q235 carbon
steel thickness 25mm Support roller, transition scraper covered hard chrome, Scrap t and cover made by 304 stainless
steel, 1.2mm thickness, Main driver use double chain drive, rods distance 25.4mm, NSK bearing from Japan Electric
control: All driving speed controlled by frequency conversion Transducer and Electronic element use LD
brand worldwidth 1200mm, sheeting dough thickness 0-20mm, Two Soft biscuit forming moulds provided with
machinery Power: 6.75KW, Dimension: 0x1500x1250mm Total weight: 1350kg

salt/sugar LDreading machinery

belt conveyor structure with brush LDing. PU conveyor belt, thickness 1mm. Gearbox use Chinese famous brand
GUOTAI, bevel wheel with high drive efficiency, low noise and work stability and so on. LD motor, high efficiency,
low noise and long using life and so on. Materials conveyor by PU belt LDing materials: salt, sugar, sesame, nutlet etc.
LDing by brush LDing Capacity controlled by transducer. Brush and conveyor belt controlled by different motor, easy
to adjusted, conveyor roll made by stainless steel. Full LDrinLDer structure made by stainless steel, Main driver use direct
drive. NSK bearing from Japan, Electric control: All driving speed controlled by frequency conversion, Transducer and
Electronic element use LD brand, worldwidth 1200mm, Dimension: 500x1350x360 mm Power: 0.75KW, Total
weight: 450kg

Tunnel oven, electric, indirect diesel oil or gas fried for option, length can be desity as per Capacity.

paint touch screen control ,stainless steel automatic

Turning machinery 180degree or 90degree desity as per the plant length

180degree Turning machinery
Suitable for plant not enough length to install U turning line PU conveyor belt, PU belt thickness 1mm, Gearbox use
Chinese famous brand GUOTAI, bevel wheel with high drive efficiency, low noise and work stability and so on. LD
motor with high efficiency, low noise and long using life and so on. Rubber covered main conveyor roll 2 diameter 160mm
steel roller for PU conveyor belt, Conveying frame use 1.5mm thickness Stainless steel, conveying belt support LDlint use
304 Stainless steel, Cover made by 1.2mm thickness 304 stainless steel, Main driver by chain drive, NSK bearing from
Japan, Electric control: All driving speed controlled by frequency conversion Transducer and Electronic element use
LD brand,

Oil LDer is important part of biscuit line,

it is use for LDing oil on the surface of biscuits.

To improved good taste

The main equipment for topgrade biscuits.

Full stainless steel structure

LD electrical and motor

LD transducer

ISO quality system

CE certificate

Oil LDer (with 4m long Oil fiLDer)

Swing t LD oil structure, Full stainless steel mesh conveyor belt without deflection

Gearbox use Chinese famous brand GUOTAI, bevel wheel with high drive efficiency,

low noise and work stability and so on.

LDing by swing t, release outside oil return inside cover

worldtemperature: max.80°C, indirect electric heating water, temperature can be

Adjusted LDing Capacity controlled by transducer, Full stainless steel machinery structure,

oil LDing chamber make by 2.0mm thickness 304 stainless steel, Support roller,

transition scraper covered hard chrome, Main driver by direct drive, NSK bearing

from Japan, Electric control: All driving speed controlled by frequency conversion

Transducer and Electronic element use LD brand, worldwidth 620mm

Oil LDing quantity: 1-5kg/min

Power: 0.75KW, Dimension: 6000x920x1000 mm

Total weight: 1550kg

Biscuit stacLD machinery

Star wheels stacLD structure, composed by transition conveyor, divided biscuits in order rows and stacLD, total two

conveyor belts. PU conveyor belt 1mm thickness, Gearbox use Chinese famous brand GUOTAI, bevel wheel with high
drive efficiency, low noise and work stability and so on. LD motor, high efficiency, low noise and long using life and
so on. StacLD by star wheels, stacLD star whels and conveyor belt controlled by sepa motor, easy to adjusted,
rubber covered main drive roll. Full stainless steel one 165mm diameter steel roller for PU conveyor belt, Support rollers
and transition scraper covered hard chrome Cover make by 1.2mm thickness 304 stainless steel Main driver by chain drive,
NSK bearing from Japan Electric control: All driving speed controlled by frequency conversion Transducer and Electronic
element use LD brand worldwidth 1300mm, speed: 0-20mm/min Power: 2.75KW,

Pack table

To tranLDort biscuit out from stacker for Pack, PU conveyor belt thickness 1mm Gearbox use Chinese famous brand

GUOTAI, bevel wheel with high drive efficiency, low noise and work stability and so on. LD motor, high efficiency,
low noise and long using life and so on. One steel roller diameter 160mm for conveyor belt,
Rubber covered main conveyor roll, Conveying frame use 1.5mm thickness Stainless steel, conveying belt support LDlint
use 304 Stainless steel, Cover made by 1.2mm thickness 304 stainless steel, Main driver by chain drive NSK bearing from
Japan, Electric control: All driving speed controlled by frequency Conversion, Transducer and Electronic element use
LD

Filling & printing biscuit: